In this guide, I’ll explain how to disassemble Dell Vostro 5470 to remove and replace the keyboard, battery, hard drive, RAM, palm rest, wireless network card, cooling fan and motherboard, refer to this guide, you can upgrade, repair, clean your Vostro 5470.
Repair Parts
Laptop Screen for Dell Vostro 5470
AC Adapter for Dell Vostro 5470
Cooling fan for Dell Vostro 5470
Keyboard for Dell Vostro 5470
LCD Cable for Dell Vostro 5470 â€" 03T95G
Remove all screws from the bottom case.
Pry up and remove the bottom case, you can separate the bottom case with a guitar pick.
When the bottom case removed, you can get access to the battery, hard drive, heat sink, cooling fan, wireless card, RAM and motherboard.
Remove three screws securing the battery.
Disconnect the battery connector from the motherboard. Now the battery can be removed.
The Dell Vostro 5470 using a 51.2wh Li-ion battery, Dell part number: VH748.
Remove two screws securing the hard drive module
Remove the hard drive.
The Dell Vostro 5470 comes with Seagate 500GB 5400RPM hard drive.
Separating two clips with fingernails, the RAM will popup automatically.
The Dell Vostro 5470 featured a SK hynix 4GB PC3L-12800S 1600MHz memory.
Remove the screw securing the cooling fan. There are two on each side of the fan.
Remove six screws securing the heat sink.
Heat sink and cooling fan assembly
Dell Vostro 5470 cooling fan
Remove one screw securing the wireless card.
Unplug two antenna cables.
No comments:
Post a Comment