In this guide, I’ll explain how to disassemble Xiaomi Redmi Note 3 to remove the back cover, battery, speaker, camera and motherboard. Refer to this guide, you can repair your Redmi Note 3.
Redmi Note 3 supports dual card dual standbys, using dual Micro SIM card slots.
Pry up and remove the back cover with a guitar pick.
There is a layer of cooling sticker covered the back cover.
Redmi Note 3 using Swedish fingerprint cards’s FPC 1022 chip.
Under the back cover, you can access the internal components, including battery, speaker, camera and motherboard.
Redmi Note 3 comes with a 3.8v, 4000mah Li-polymer battery.
13MP rear camera and 5MP front camera, with Samsung S5K3M2 sensor, assembled by Oflim
Redmi Note 3 speaker module
Redmi Note 3 motherboard
The little board integrated a Micro USB port, a microphone and a virtual key backlight.
MTK Helio X10(MT6795) processor
MTK 6331P power management chip
MTK 6332P power management chip
MTK 6169V RF chip
Qorvo RF5216 RF chip
Toshiba 16/32GB ROM
MTK 6630QP Combo Wireless Connectivity SOC
Qorvo RF5410 RF chip
No comments:
Post a Comment