In the following guide I will to disassemble a Lenovo IdeaPad Yoga 2 11.
Most internal components in this model can be replaced after you remove the top cover assembly. I will remove the battery, hard drive, bottom case, wireless card, speakers and motherboard. Refer to this guide, you can upgrade and repair your Lenovo Yoga 2 11.
Before taking it apart, make sure the laptop is turned off.
Remove all screws from the bottom case.
Pry up the bottom case and take it away.
Under the bottom case you can access the battery, hard drive, wireless card, speakers and motherboard.
Remove six screws securing the battery.
Disconnect the battery power cable from the motherboard, you can remove the battery.
Lenovo Yoga 2 11 comes with a 7.4v, 34wh Li-polymer battery.
Remove four screws securing the hard drive module.
Lift up the hard drive module. You can see the SATA cable still connecting to the motherboard.
Lift up the scotch tape and disconnect the cable from the motherboard.
This Lenovo Yoga 2 11 features a Seagate 500GB 5400 RPM hard drive.
Remove one screws securing the wireless card.
Disconnect two antenna cables, you can remove the wireless card.
Lenovo IdeaPad Yoga 2 11 wireless card
Remove all screws securing the speaker modules (left and right).
Disconnect the speaker cables from the motherboard.
Two speakers
In the next step, I will remove the motherboard.
Disconnect the dc power jack cable
Disconnect the LCD cable and remove the screws securing the motherboard.
Lenovo Yoga 2 11 motherboard has been removed.
Button board
Lenovo Yoga 2 11 touchpad
DC power jack
Lenovo Yoga 2 11 motherboard
Lenovo IdeaPad Yoga 2 11’s memory chips were soldering on the motherboard.
No comments:
Post a Comment