In this guide, I will show you how to disassemble Dell Inspiron M301z notebook, and you will learn how to remove, replace the keyboard, hard drive, palm rest, RAM module, wireless card, cooling fan and motherboard of Dell Inspiron 13z M301z notebook.
Remove the battery.
Remove all screws securing the bottom case.
Turn to the front side to remove the keyboard.
Lift up the keyboard and disconnect the keyboard cable to remove it.
Disconnect the cables and unscrew the screws on the palm rest.
Now you can remove the palm rest.
Here is a photo after removing the palm rest, the left bottom is the battery place.
Now remove the screen assembly, just unplug the screen cable and the two wireless antennas and unscrew the screws securing the screen hinge.
The screen is connected to the bottom via the two brackets.
Unplug the fan and remove the screws fixing it to remove the cooling fan.
A photo of the remaining parts
Disconnect the cables and unscrew the screws on the motherboard to remove it.
The bottom case
Unscrew the screws on the heat sink to remove it.
Remove the CPU chip and the GPU chip that you can see after removing the heat sin k.
The back of the motherboard
Bluetooth module
The removed hard drive, just remove the screws fixing it.
The memory module
No comments:
Post a Comment